How to Buy Matching Excavator Teeth?

Bucket teeth of excavators are important consumable parts on excavators. The market demand is very large. There are many kinds of bucket teeth, such as welding excavator bucket teeth, bofors bucket teeth, komastu excavator bucket teeth, etc. Composed of a tooth seat and a tooth tip, they are like human teeth. The two are connected by a pin shaft. Because the part of the bucket tooth wear and failure is the tooth tip, most of the tooth tip can be replaced. Based on the experience, I will share some basic knowledge about the bucket tooth and the tooth seat.

 

The material of the teeth will also be classified. Each company adjusts the gold according to the product requirements. There is no specific steel grade. That’s why we have many kinds of bucket teeth like steel casting bucket teeth. For example, adding metals such as manganese, chromium, and tungsten to improve the work performance, and then make heat treatment or cold treatment improve again. Excavator bucket teeth manufacturers generally require products that are resistant to wear, high hardness, high temperature stability, and cheap. The overall rigidity of the bucket teeth is strengthened through the design structure. So how to buy a bucket tooth?

 

 

Confirm the Excavator Model

According to the excavator tooth point manufacturer, it is of course the most convenient to know the specific model of the excavator. If the tooth seat (tooth root) of the excavator bucket has not been replaced, you can directly purchase matching teeth or general-purpose teeth. For example, the bucket teeth of most models of some excavators are universal.

 

 

Confirm Tooth Number

If you don't know the specific model of the excavator, or the tooth seat (tooth root) has been replaced, which is not the original one, you can look at the used bucket teeth. Except for the trademark, there will be some letters and numbers, which are generally domestic or international codes. Remember these codes to prevent you from buying them wrong.

 

 

Measure Tooth Cavity Size

If you do not know the specific model of the excavator, the tooth seat (tooth root) has also been replaced, it is not the original one, and the words on the bucket teeth are not clear. The tooth cavity is the hollow part of the tooth tip where the tooth seat is inserted into the fixed, and the two parts must be matched to work normally. You can measure the inner diameter of the tooth cavity. It is also a common method to tell the salesperson the size of the tooth cavity.

 

 

Our company specializes in excavator bucket teeth and Adapter, Pin and Locks, Grader Blade, Cutting edge and End Bits, Undercarriage parts, track link, track shoes, track roller, sprocket, carrier roller, Excavator Buckets, etc. Many products, such as trailer king pin lock, tubular pin tumbler lock, travel trailer hitch lock, etc. are very popular. Our products are well-known for their high-quality.

 

There are excavator bucket teeth for sale, so if you want to purchase bucket teeth, welcome to contact us.